MSB Coarse Powder Mill
MSB Coarse Powder Mill Introduction:
MSB Coarse Powder Mill is a new generation grinding mill with high efficiency, it was designed by our experts, they have adopted the advices of our client notional and aboard, and combined years of experise of industry. the msb coarse powder mill has instead of the traditional mill, such as raymond mill, ball mill and so on. The grinding mill is applied in quartz sand, silica sand, foundry sand, fine sand and other sand abrasive industry.
MSB Coarse Powder Mill Advantages:
1. MSB Coarse Powder Grinding Mill high efficiency of wear material, wear evenly, the lifetime is three times higher than that of raymond mill.
2. High percentage of sand can be produced.
3. The grinding mill is a high efficiency desulfurzation equipment, and the desulfurization effect is better.
4. The grinding Mill can be used as pre-grind equipment before ball mill.
MSB Coarse Powder Mill Working Principle:
Step with main shaft, bulk disk and roller bracket is driven by motor through reducer. Installed above bracket, roller assembly rotates with main shaft and swings freely meantime, this bring a large centrifugal force, which scatters bulk materials evenly in grinding intermediate layer between central roller and ring. The bulk materials are grinded into powder and fall on the bottom, and then discharged from discharging opening under the effect of synchronously-rotating scraper.
MSB Coarse Powder Mill Specification:
| Name |
Parameter |
Remark |
| Model |
Power |
| Model |
MSB1004 |
|
| Roller quantity |
4pcs |
|
| Max. feeding size |
<30mm |
Too hard material<20mm |
| Product size |
70-90%<2mm |
Adjustable, check below |
| Capacity |
8-15ton/hour |
Relative to average size and hardness of feeding material |
| Main motor power |
37-45kW |
Use small motor if use fine material and want low capacity |
| Main motor model |
Y2-225M-4 |
45 kW |
| Overall size（L×W×H） |
1.87×1.5×2.58(m） |
Including main motor, decelerator and main unit |
| Largest single pc weight |
900kg |
|
| Total weight（excluding electricity control cabinet） |
8ton |
Decelerator weight 1.7 ton |
| Jaw crusher of fine crushing |
PEX150×750 |
15kW |
|
| Bucket elevator |
TH250 |
3kW |
Speed≥1.2m/s |
| Electromagnetic Vibrating feeder |
GZ3 |
0.2kW |
Distance between inlet and outlet 1000 |
